The Dino Air Bag - S2

The Dino's Air Bag - S2 is a 2 in 1 tool to protect car from scratching.
The Dino's Air Bag - S2 is capable of exerting to an extreme pressure. Please inflate the Dino's Air Bag - S2 with extreme care. The manufacturer and distributor of this product are not responsible for injuries to persons or damage to car.

Description:
The Dino's Air Bag - S2 slides between the car door and the weather stripping on the doorframe. Once the pump is squeezed, inflating the air bag, the car door separates from the frame. This allows plenty of room to insert a car-opening tool from the sleeve.

Multiple The Dino's Air Bag - S2 units can also be used for installing windows and doors, and holding doors open while installing door hardware.

The Dino's Air Bag - S2 is equipped with a bulb pump and release valve for quick and easy inflating and deflating.

For Car Openings:

1. Insert the deflated The Dino's Air Bag - S2 between the door and weather-stripping at the top cornet (see figure A) the car door furthest from the hinges, or insert the air bag as shown on figure B.
2. Squeeze the pump to inflate the air bag creating a gap between the door and the weather stripping.
3. Insert a car-opening tool (GoldFinger Prod Code- L034-1) from the sleeve and unlock the car. Press the release valve to deflate.

Installing Window and Doors:
The Dino's Air Bag - S2 holds windows and doors in place while levelling for easier installation. Simply slide the air bag around the window or door (both top corners and centre bottom) and inflate.

Specifications:
Thickness (deflated): 2mm (0.08”)
Thickness (maximum inflated): 70mm (2.75”)
General pressure: 98kg (220lb)
Maximum pressure: 196kg (440lb)
Material: fortified Vinyl
Height: 143mm
Width excluding sleeve: 158mm

Click here to download product leaflet.